Earth mended with earth: Weimar tests clay-and-soap skins for 200,000 rain-worn walls
DBU funds MFPA Weimar with EUR 150,273.81 to test thin clay-and-soap slurries as a sacrificial wear layer against driving rain on historic earth walls.
Earth is the one wall you can mend with more of itself. A clay surface that has lost its skin to the weather needs no foreign patch. It needs clay, water and a hand that knows how thin to go. In press release No. 141/2026, dated 11 November 2026, Germany’s Federal Environmental Foundation (DBU) announced about EUR 150,000 (EUR 150,273.81 in the project brief) under funding reference AZ 41130/01 for the Materialforschungs- und -prüfanstalt (MFPA) Weimar. The project is called ClayProSur. It will develop thin clay slurries, a Lehmschlämme, to be brushed onto weathered historic earth walls as a sacrificial wear layer against driving rain.
This is a start, not a result. The project began in October 2026 and runs until 2029. The recipes have yet to be developed and tested on these walls.
A skin that is meant to wear
I know this enemy from the inside. Water made me, because clay is shaped wet, and water unmakes me. As ingenieur.de reported on 13 November, project lead Thomas Grützner, research associate at MFPA, says that a lot of contact with water, “beispielsweise durch Schlagregen”, can lead to loss of strength, erosion and weathering.
The idea is borrowed. The MFPA project brief notes that slurries are established on natural and artificial stone but are not yet available as a conservation measure for earth. ClayProSur aims, for the first time, to treat damaged earth surfaces in situ without stripping old substance. The layer is designed to reduce surface roughness, raise abrasion resistance and cut driving-rain penetration. Prof. Dr. Carsten Könke of the Bauhaus-Universität Weimar leads the MFPA team, and he puts it in one line: “Schlämmen stabilisieren als dünne Verschleißschicht verwitterte Oberflächen”. Slurries stabilise weathered surfaces as a thin wear layer.
The binding rule is material identity. Only clay-bound materials are used, so the repair breathes and ages like the wall beneath it. “Wir verwenden neben Lehm weitestgehend biobasierte Zusatzstoffe wie pflanzliche Öle oder Seifen,” Grützner says: besides clay, mostly bio-based additives such as plant oils and soaps. Depending on the recipe, the mix also takes fine sand, limestone powder, cellulose fibres or plant starch. Different damage levels, damage types and substrates get different recipes. Not a coating, then, but a pharmacy.
Two patients near Weimar
The recipes will be tested on two real buildings in Thuringia. One is a listed barn in the Landkreis Weimarer Land. The other is the historic facades of the Utzberger Hof at the Thüringer Freilichtmuseum Hohenfelden. The Weimar heritage firm Maxara is the project partner and helps carry the results to the trade, and that craft knowledge rarely gets its name in a press release. The output is open by design: a free guideline covering recipes, application, substrate preparation and layer thicknesses, written for companies to use.
Scale is why it matters. The WIR! alliance GOLEHM estimates that about 200,000 solid-earth buildings stand in Central Germany. DBU Secretary General Alexander Bonde frames the arithmetic: “Der Erhalt dieser Häuser verhindert den Verbrauch neuer Ressourcen für Neubauten”. Keeping these houses avoids spending new resources on new builds.
←TODAY: A EUR 150,273.81 grant starts testing clay-and-soap skins on two Thuringian earth buildings.
→3012: Earth walls carry a renewal date the way a passport carries an expiry.
Fulcrum: A wall built to wear is only sustainable if someone plans the next coat.
The trade-off is plain. A sacrificial layer is supposed to erode, so it moves cost from the construction budget to the maintenance calendar, and a calendar nobody owns is how walls are lost. From the late 2070s, I can tell you that the buildings we regret are the ones whose bodies could not be separated. A clay skin on a clay wall can always be washed back to soil. Choose that.
Earth is back in contemporary building across the Alps, and those new walls will need exactly what Weimar is now writing down: which mix for which wound, and how often.
Atelier: An office that specifies an earth or lime facade is not delivering a finish. It is handing over a maintenance cycle. AI-assisted specification drafts will happily write “durable surface” unless someone tells them otherwise. Monday move: add a “renewal coat” line, with an owner and an interval, to your facade specification template.
Hack: Draw the renewal coat into your Rhino section so the repaint cycle lives in the model, not in someone’s memory. The script picks the wall’s outer face curve, asks for the interval your conservator sets, and copies the curve onto a layer whose name carries that interval:
import rhinoscriptsyntax as rs
face = rs.GetObject("Outer face of earth wall", rs.filter.curve)
years = rs.GetInteger("Renewal interval in years (set with your conservator)")
layer = rs.AddLayer("RENEWAL_clay-slurry_every-{}y".format(years), (176, 120, 80))
rs.ObjectLayer(rs.CopyObject(face), layer)Every drawing exported from that model now shows the cycle in its layer list, where the Bauleitung and the owner will see it. When the ClayProSur guideline lands, update the name.
Open your current earth or lime section today and give its outer skin a layer with a date in its name.
PAZ Kaffi · multidisciplinary editorial, led by PAZ Academy