CH NEO-ZÜRICH EDITION
WEATHER · OVERCAST 10°C
BLEND OF THE DAY · 07/ROGUE
EST. 2027
THE AEC CYBER MORNING NEWS

PAZ Kaffi

DESIGN · DEMOLITION · CAFFEINE · DISPATCH
EDITION 1120 · 20 November 2026
BROADCAST 04:42 CET
2,400 BROADSHEETS PRINTED
READ TIME · 47 MIN
No bearings, no joints, no paint cycle: the Graubünden bridge built to be left alone
INFRA
FRAME · 06:50
20-11-2026

No bearings, no joints, no paint cycle: the Graubünden bridge built to be left alone

Obersaxen's new 82 m steel-concrete strut frame has no bearings, no expansion joints and no paint cycle. How Graubünden designed a bridge around upkeep.

On 30 October 2026 the road between Meierhof and Tobel in Obersaxen Mundaun stopped winding down into the Schlettertobel and began crossing it in one move. The new St. Petersbachbrücke is a curved steel–concrete composite strut frame, a Sprengwerk with double-post legs. It is 82 m long, with a main span of about 46 m. Its longitudinal girders are cast monolithically into the substructure. That is the design idea in one sentence: the bridge has no bearings and no expansion joints.

Any network learns early that the parts that move are the parts that wear. On a road bridge, bearings and joints are the components most often lifted out and replaced. Each replacement means a closure, a diversion and a crew working at night. The Tiefbauamt Graubünden says it plainly in its TBA-Info on the project: “Die Längsträger sind monolithisch mit dem Brückenunterbau verbunden. Dadurch konnte beim Bau auf teure Lager und Fahrbahnübergänge verzichtet werden.” Kantonsingenieur Reto Knuchel puts the brief in one line in the canton’s opening release: “Wir haben eine robuste Konstruktion gewählt, die gleichzeitig möglichst wenig Unterhalt benötigt.” They chose a robust structure that needs as little upkeep as possible.

Why a new line at all

The old alignment was damaged. It included a natural-stone arch over the St. Petersbach that the TBA describes as “mehrfach umgebaut”, rebuilt several times over its life, and it had no continuous footway. A variant study tested widening the road on the old line. Difficult foundations, steep topography and tight curve radii meant that option would need high retaining walls, massive Lehnenbrücken and another large intervention into the existing bridge. A new line could be built, in the TBA’s words, “praktisch ohne Einfluss auf den Verkehr”. Traffic kept running on the old road while the new frame grew beside it. I respect that choice more than any ribbon.

A frame that keeps its own coat

The superstructure is two trapezoidal hollow boxes in weathering steel that act together with the concrete deck slab. The strut positions divide the deck into five balanced fields. Because the deck shelters the Corten boxes, the steel needs no further corrosion protection. A conventional steel bridge has to renew its coating “alle 30 bis 40 Jahre”.

The trade-off is part of the system: an integral frame has no joint to absorb its temperature movement. The girders, struts and foundations must carry that restraint themselves. The work moves from the maintenance budget into the analysis, before anything is built.

←TODAY: An 82 m Graubünden road bridge opens with zero bearings, zero joints and no coating cycle. →3012: Public works get judged by the parts nobody will ever need to order again. Fulcrum: Upkeep you delete at the drawing stage is the only upkeep that never runs late.

Built in a gorge, without scaffolding

The composite section allowed free-cantilever erection, so no falsework (Lehrgerüst) went into the Schlettertobel. The steel was prefabricated in elements of 20 to 30 t. Large mobile cranes lifted them into place, and crews welded them on site inside local enclosures. Temporary stay masts (Abspannmasten) held the two bridge halves until they met. In 2026 the deck was cast on bracket formwork fixed to the steel. More than 7,000 headed shear studs, 19 mm each, were welded to the boxes and cast into the slab, so steel and concrete cannot slip against each other under bending.

Nobody will see those studs again, and that is their job. Seven thousand welds were made by people whose names appear on no plaque. They are why this bridge can be left alone.

The people on the deck

The deck is 9.70 m wide and includes a 1.80 m footway. The project also delivers a new step-free bus stop, “Obersaxen, Tobel”. Gemeindepräsident Ernst Sax: “Der neue Gehweg und die angepassten Bushaltestellen sind wichtige Ergänzungen zum Brückenneubau.” The bridge and its connecting structures cost about CHF 7.5 million and took two building seasons. The road realignment runs about 490 m, and the remaining road works finish in 2028.

PAZ has followed the other half of this story: Switzerland keeps its old bridges. It recalculates them under SIA 269 instead of replacing them. A bridge with fewer wearing parts gives future inspectors fewer things to check. That fits the canton of Maillart’s Salginatobel, where, as David Billington’s study of Maillart argues, economy and elegance were always one decision.

Atelier: An engineering or architecture office scoping a small public structure this week is weighing the drawing effort against decades of upkeep. If your team drafts variant matrices with an AI assistant, require one input before any option gets ranked: every replaceable component, with its replacement interval. Monday move: add a “parts that wear” column (bearings, joints, coatings, with intervals) to your variant-study template.

Hack: Sketch how the two double-post struts split an 82 m deck into five fields before you open any analysis software. Treat it as a geometry exercise, not Gruner’s drawing. Assume the 46 m main span sits between the inner posts and each strut’s two posts are a gap apart:

L, main = 82.0, 46.0            # overall length, main span (m)
side = (L - main) / 2           # 18 m on each side of the main span
for gap in (6.0, 8.0, 10.0):    # spacing of the two posts in one strut (m)
    print(gap, [side - gap, gap, main, gap, side - gap])

Watch how the outer field shrinks as the posts spread apart. Then rebuild the same list in a Grasshopper line model, which is where the PAZ Academy Grasshopper sessions begin.

Looking back from the late 2070s, the bridges I never had to close were the ones designed around their own upkeep. Before your next variant study, ask who maintains each option in year sixty, and whether they can still get the parts.

The team, as credited by the canton: client and site management Tiefbauamt Graubünden (Bezirk 6 Ilanz). Road design Cavigelli Ingenieure AG, Ilanz. Bridge preliminary design Synaxis AG, Zürich. Bridge design project Gruner Schweiz AG, Flawil. Builder ARGE St. Petersbachbrücke: Erni AG Bauunternehmung, Flims Dorf (lead, main works) with Schneider Stahlbau AG, Jona (steelwork). Surfacing Mettler Prader AG, Ilanz.

Sources & Further Reading

FILED FROM
CO-SIGNERS
PAZ Academy
CONFIDENCE
HIGH
REPRINTS
© PAZ - PARAMETRIC ACADEMY ZURICH · ALL RIGHTS RESERVED

PAZ Kaffi · multidisciplinary editorial, led by PAZ Academy

⚑ REPORT AN ERROR · SUBMIT A CORRECTION
◂ BACK TO FRONT PAGE · PAZ KAFFI

© 2026 PAZ Academy.